Slee Off Road executes a new high quality process in Powder Coating to ensure the utmost in quality, resiliency and appearance. Example of a blasted, washed, primed and powder coated surface The four step process is as follows; Blasting: White Metal Blasting...
SPRING SPACERS Spring spacers are an entry level component to achieve additional lift height, without addressing load carrying capacity of the suspension. Spacer lifts are not recommended for applications where additional lift is required due to the addition of...
Using the Bushing Grease Tool Example Shown on a UZJ100 Land Cruiser Once you have removed the dust cap and drive flange, you expose the axle stub shaft were the wheel hub nuts can be accessed. To access the spindle threads start by unbending the locking tab of the...
The Slee front control arms for the 80 Series Land Cruiser are machined from a solid 1.75″ thick steel plate. Steel Plates Before Machining The plates are loaded into the CNC milling machine and rough cut to produce the blanks for the arm. Left over drops after...
Dan Busey and Spencer Bybee This modification does not have anything to do with the CENTER DIFFERENTIAL LOCK SWITCH (CDL) directly. You do not have to do this, if you just install a CDL switch. The purpose of this mod is to overide the default behaviour of the vehicle...
