Description

The SliderSteps were designed as an alternative for people that require easier access into the vehicle, yet still want off-road protection.

The SliderSteps consist of a 2″x4″ (3/16″ wall) rectangular tube with a 1.75″ tube welded to the main slider. The tube is supported with two extra gussets to provide exceptional off-road protection. The tube is laid flat and the area in between is filled in with a plasma cut piece of 1/8″ plate.

The plate is bolted to the slider and coated in a skid resistant powder coat. The panel has drainage holes to reduce snow, ice and water buildup. The main slider is coated with semi black powder coat.

This SliderStep is the ideal compromise between easy entry to the vehicle and off-road protection. The sliders are installed on the truck with 7/16″ U-Bolts that wrap the frame. With the 1995/1997 models, the passenger side front support is a bracket that curves under the catalytic converter. This supported is bolted to the frame using 4 8mm bolts into existing holes on the frame.

These sliders are coated in a semi-glass black and the removable tread plate is coated with textures slip resistant coating.

Toyota oem mud flaps or stock running board end caps can be used to complete the installation. The mud flap is notched to accept the slider, or the running board end cap can be trimmed to fit.

What customers have to say!

Slee, Last weekend I was driving to Utah from Colorado when the roads got dangerous just outside of Cheyenne Wyoming. 40+ MPH winds with a very wet snow meant icy roads. Long story short the cruiser went into a slide….I over corrected back and forth about 6 times when I finally went off the road sideways into a street sign. To my surprise when I jumped out to access the damage, the sliders took the brunt of the pole, bending it over completely. The cruiser just slid over it without a scratch to be found on the body. The slider does have a small dent but is in otherwise perfect condition. I know your products are spendy compared to the others but they just paid for themselves! Thanks again for making such a solid product! Tim York

“I helped another list member install a set of the Slee Sliders yesterday. For those of you who haven’t seen them, they are beautifully made, have great welding, and fit perfectly.  The undercat support is a work of art.  I was very impressed.  They are fairly heavy, so installation is a 2 man job.  We used 2 men and a trolley jack.  I wish I had more $ for one of Christo’s new bumpers! Andrew Pollock”

” For those who have been to Moab, we ran Hells Revenge, including tip-over-challenge, and lower-helldorado the first day.  Chickened out on Hells-gate (heck it was our first day there, we were pansies I know). Lower Helldorado is HELL for large vehicles …ahhhhhh…only damage is what you’ll see but if it weren’t for Christo’s sliders I couldn’t write this because I’d have to pawn my computer to pay for the damage…seriously every turn was made with the slider against a rock pushing the rearend around a 6 foot radius, I couldn’t believe the sliders held up to that abuse, simply unbelievable!!  Mark Brodis”

“Beli and I spent the last few days in Moab and I wanted to let you know how well the sliders I purchased from you performed. I am very pleased!! We really put them to the test on Lower Helldorado where they were continually being dragged or used as a pivot point. I managed to complete the trail with only a couple of nicks on the fender flares (minor). Beli was literally within a hairs’ breath of caving in his whole right side but received only a minor scratch on his passenger door (along with the usual scrapes). All of my damage can be repaired with a rattle can. Tom Edwards”