Specifications:
- Old Man Emu BP51 suspension 3”
- Icon Vector 5 Wheels in Bronze Matte finish wrapped in 10-ply Toyo Open Country ATIII tires, measuring at 285/75/17 (34”)
- ARB Summit front bumper with camera relocation, custom “miller mount” ARB quick air fitting behind Solis light.
- Baja Designs Squadron SAE Fog lights wired to Switch-Pros
- ARB Solis Intensity light Kit wired to Switch-Pros (1-flood, 1-Spot)
- Come Up Seal Gen2 12.5rs Winch with Synthetic rope and wireless remote
- Factor 55 Flat Link
- Slee Off Road Offset Hawse Fairlead
- Slee Rear bumper with Swing-outs
- Slee Maxtrax holder for mounting inside Tire Swing-out
- Slee Jerry Can basket to hold three Jerry Cans
- Custom mount for Rear Driver-side mounted ARB quick connect air hoe fitting
- Customer mount on passenger-side for Anderson connector for Solar Input
- Slee Hi-lift mount on Tire Swing-out to fit 48” Hi-Lift Jack.
- 5lb Propane tank and holder mounted to Ladder Swing-out and 12ft stainless braided line.
- Front Runner Slimline II Roof Rack
- Baja Designs S2 work scene lights (side mount)
- Baja Designs S2 Work/scene light (rear corner mount for angled or rear lighting)
- Baja Designs OnX6+ 40” White LED Light bar Driving/Combo pattern
- Front Runner awning brackets
- ARB 2500 Awning with Black Aluminum hard case with LED light
- Switch-Pros SP9100 8-Switch Panel Power System.
- Slee sunglass holder mount for Switch Panel
- Slee Switch-Pros Engine mount for main unit.
- ARB Twin Compressor with remote mounts for front and rear accessibility
- ARB pump-up kit.
- ARB Digital Tire Inflator
- Slee Compressor mount in engine bay with ARB Manifold
- ARB drawer system with one Roller Top (Passenger side)
- Cargo quick release latches installed on both drawer tops to hold cargo, fridges etc.
- Rear Hatch LED lights in Clear/Red/Yellow configuration with electrostatic switch.
- One Red/Clear and one Clear/yellow mounted inside rear hatch to provide optimal light when in cargo area at dark
- Wired to constant 12v power
Specifications:
- Rear Hatch LED lights in Clear/Red/Yellow configuration with electrostatic switch.
- One Red/Clear and one Clear/yellow mounted inside rear hatch to provide optimal light when in cargo area at dark
- Wired to constant 12v power
- Slee Dual Battery system with Solar compatibility
- Group 31 battery upgrade (Main Battery)
- Group 35 battery added (house battery)
- Redarc DC-DC 50 Amp.
- Slee Billet Terminal set (long set for Group 31, short for Group 35 battery)
- Slee Group 31 battery upgrade tray
- USB C/A outlets (2) added to rear of center console wired to constant 12v power
- 12v socket, USB C/A outlets added to passenger side third row cupholder positions with Slee Mount for Fridge/accessories wired o constant 12v with house battery o12v socket, USB C/A, USB C and Digital Voltage meter installed in third row seat release panel, wired to constant 12v power through house battery
- Auxiliary fuse panel installed in passenger side third row for all accessories running in cargo area.
- LRA (Long Range America) 24-gallon fuel tank installed in previous spare tire location
- Slee Upgraded pump and fittings
- Pressure tested to O.E. specs
- Switch wired to dash panel
- Slee 200 Series Skid Plate System
- 3/16’s gauge steel panels to protect undercarriage
- Slee panels allow accessibility for Oil changes and differential fluid changes without removal of panels
- Gamiviti Speaker mount
- Gamiviti mount install in in-dash speaker panel to allow fitment of radio/Ram mounts etc.
- Mounted GMRS radio
- Wired with constant 12v power off house battery
- Quick disconnect of cable and power supply along with secondary O.E. panel provided to look “factory” within minutes
- Redarc Trailer Brake controller
- Trailer brake controller with Redarc harness allows clean install with minimal dash space (small button/knob)