PAST PROJECTS

Slee-Carrier ™ Mounted on TJM rear bumper Owner: Sleeoffroad After trashing the plastic corners of the stock bumper, we decided to upgrade to an aftermarket bumper. We liked the TJM bumper for it complimentary lines. However we did not like the tire carrier they...

4Runner Bumper & Tire Carrier Owner: Ted Evans Ted required a bumper and spare tire carrier for his 4Runner that would hold a 35" tire, jerry can and hi-lift jack. All this had to be accomplished without sacrificing to much ground clearance. It also had to be...

Slee-Carrier ™ Swing Out Tire Carrier Owner: Kendall Seifert After seeing the original Slee-Carrier Kendall had to have one. This is similar in design as the original with minor improvements. The latch catch plate now bolts to the receiver piece and the antenna mounts...

Inside Tire Carrier Owner: Kevin Stup Kevin prefers to keep his spare tire mounted inside the truck. He wanted a tire carrier that would safely and securely keep the tire in plate, take up as little space as possible and still leave half of the cargo area open for...

If you start to play in the rocks, protection for the rocker panels will soon be one of your priorities. This was a custom set of  2"x4" (1/8" wall) Slee-Sliders that were made for Ted Evans. Requirements were sturdy frame mounted supports and minimum loss of ground...

2nd generation Slee-Sliders rocker panel protection & step Similar in concept and execution but fitted to a 1995 80 Series, these Sliders were made to accept an outboard runner that serves as a running board. The outside runner is capped with anti-skid material...

Slee-Carrier ™ swing out tire carrier As we all know the stock location of the spare tire and the US Spec 2" receiver leaves a lot to be desired when going off-road. The Slee-Carrier addresses both these concerns in a well executed swing out carried that pivots on...